Blue Viper Instruction Guide

QUICK START GUIDE

SPRAY HEAD UNIT

Shaft

POWER UNIT

Pressure Switch

Spray Hood

Handle

Nozzle

Battery Compartment

Tank

Fill Cap

Battery Compartment

1. INSERT BATTERIES (not included) • Insert 4 AA batteries into the battery

compartment located on the underside of the tank (see diagram). • Test batteries by briefly pressing the Pressure Switch and listen for the pump sound.

2. PRIME PUMP (before assembly) • Fill the tank with plain water. • Press the switch to activate the pump. • When water is delivered out the tube end, priming is complete. • Dump water out of tank.

3. ASSEMBLY • Insert shaft of spray head unit into coupling of power unit aligning shaft ends as shown. • Firmly press two shaft ends together. If needed, a drop of dishwash soap on the O-rings may help. • Twist clockwise to lock the connection as shown.

4. FILL THE SPRAYER • Remove the Fill Cap. • Inspect tank for debris. • Carefully pour preferred liquid herbicide solution into 16 oz tank. • Replace Fill Cap and hand tighten.

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER