Blue Viper Instruction Guide

The Award-Winning, Battery-Powered, Precision, Lawn & Garden Sprayer CONVENIENT PRECISE

ECONOMICAL LIGHT WEIGHT ENVIRO-FRIENDLY CORDLESS

• • • QUICK START GUIDE PRECISE SPRAYING TIPS & MAINTENANCE MANUAL

(888) 243-4891 www.blue-viper.com 6323 N 150 E, Monon, IN 47959

6323 N 150 E, Monon, IN 47959 • (888) 243-4891 • www.blue-viper.com

Thank you for purchasing the Blue Viper™ Precision Lawn and Garden Sprayer. The Blue Viper provides a fast and easy way to spray your weeds and insects. You are going to be amazed with its precision and ease of use. Every Blue Viper is inspected and tested on our farm in Indiana, so you can get started spraying right away. We have included a quick start section with 5 simple steps. Take a minute to read the quick start section, check out the spraying tips, and of course, make sure you read over the warnings and cautions. If you have a spare moment, visit our website: www.blue-viper.com . You will be able to find information on how to use your new sprayer, the history behind the Blue Viper, short videos and our Warranty Registration. If you ever have any questions, our dedicated customer service staff will be happy to help! Phone: (888) 243-4891.

Sincerely, Danielle Paluchniak President

P.S.: Our kids love using it to write on the concrete — just add clean, clear water and let them go for hours of fun!

ACTIVATE YOUR BLUE VIPER WARRANTY TODAY!

WARRANTY REGISTRATION • To activate your warranty please go to www.blue-viper.com/warranty or call (888) 243-4891. • Complete the warranty information • Keep your sales receipt. You will need this in case of a warranty issue.

Visit Blue-Viper.com for other great products designed specifically for your Blue Viper.

QUICK START GUIDE

SPRAY HEAD UNIT

Shaft

POWER UNIT

Pressure Switch

Spray Hood

Handle

Nozzle

Battery Compartment

Tank

Fill Cap

Battery Compartment

1. INSERT BATTERIES (not included) • Insert 4 AA batteries into the battery

compartment located on the underside of the tank (see diagram). • Test batteries by briefly pressing the Pressure Switch and listen for the pump sound.

2. PRIME PUMP (before assembly) • Fill the tank with plain water. • Press the switch to activate the pump. • When water is delivered out the tube end, priming is complete. • Dump water out of tank.

3. ASSEMBLY • Insert shaft of spray head unit into coupling of power unit aligning shaft ends as shown. • Firmly press two shaft ends together. If needed, a drop of dishwash soap on the O-rings may help. • Twist clockwise to lock the connection as shown.

4. FILL THE SPRAYER • Remove the Fill Cap. • Inspect tank for debris. • Carefully pour preferred liquid herbicide solution into 16 oz tank. • Replace Fill Cap and hand tighten.

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER

5. START SPRAYING 3. … this is where the fun begins

Spray Hood

Couple of things you should know about your Blue Viper before starting to spray. It has been designed to deliver the optimum amount of weed killer using a fixed rate fine mist and a 2” wide swath. This saves you money by using less weed killer since over spraying or soaking weeds is eliminated. SPRAY PATTERNS The Blue Viper utilizes a self priming pump. The pump is activated by pressing and holding

Nozzle

the pressure switch located on the handle. Holding the nozzle near or on the ground will deliver a small precise shot of weed killer. Holding the nozzle 6” from the surface will deliver a larger round spray pattern appropriate for covering larger areas, such as broadcast spraying. HOW TO HOLD THE SPRAYER To begin, hold the pressure switch down for a continual flow. Walking at a normal pace, holding your arm and wrist in a comfortable manner to the side of your body, with the handle about 30” above the ground surface. Holding it higher will not allow the pump to pull the last few ounces out of the tank. For discussion on spray coverage, see “Coverage” in Tips & Warnings section.

DONE SPRAYING, BEFORE YOU PUT IT AWAY

CLEANING THE SPRAYER • Pour out any remaining liquid and drain the tank completely

• Add clean water to the tank and swish around for a few seconds, then pour out • Add a small amount of water to the tank and spray to remove residual materials from the pump and nozzle. Spray until all liquid is out of the tank • If necessary, repeat steps 2 and 3 to insure the sprayer is clean SHORT TERM STORAGE (to avoid leaks) • There is an air vent on the top rear of the tank to allow proper function of the pump. When taking a break, it is recommended to keep that vent facing up to avoid leakage over time. Do not lay on side. • OPTION 1: Set on ground with switch on top. OPTION 2: Hang on wall from handle. Both options will keep the vent up. • Longer term storage - we recommend emptying the tank WINTER STORAGE Follow cleaning instructions, then make sure to run the pump dry (until nothing comes out of the nozzle) prior to storing. Liquid left in the sprayer will freeze and damage the sprayer. Note: While batteries can remain in the unit normally, for long term storage (ex: winter months) remove the batteries to prevent any chance of corrosion.

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER

FOUR SPRAY PATTERNS

• SPOT SPRAYING • Precise placement of weed killer with no overspray. Reach between plants in mulch beds and gardens. • Place the Blue Viper hood on the ground over the weed

that is to be killed. Press and release the pressure switch. Move and repeat as needed. It takes only a brief second for enough chemical to be applied in spot spraying. Then allow a second for the check valve to close to avoid dripping over desirable plants.

• CONTINUOUS EDGING • No stopping necessary with battery powered operation. Ideal for edging sidewalks, mulch beds, fence lines, patios and around trees.

• Place the Blue Viper hood 1”-2” from the ground. Press and hold the pressure switch while starting to walk. Follow the edge of the area to be sprayed. Release switch when finished.

• BROADCAST SPRAYING • Covers larger areas. Perfect for gravel drives, walking paths, mulch beds, etc. • Place the Blue Viper hood 6”-8” from the ground.

• Press and hold the pressure switch. While walking backwards, move the hood left to right, to evenly cover the area. Release the switch when finished. Remember with weed and grass killers, you do not need to soak the ground for an effective kill.

• OVERHEAD SPRAYING • Spray hard to reach overhead locations. Perfect for spraying insecticides on roof overhangs, fruit trees, and arbors.

• Place the Blue Viper hood 6”- 8” from the targeted area. Press and hold the pressure switch. Release the switch when finished.

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER

6323 N 150 E, Monon, IN 47959 • (888) 243-4891 • www.blue-viper.com BLUE VIPER DISAPPEARING DYE (OPTIONAL) The Blue Viper Disappearing Dye is designed to save you money, minimizing the amount of chemical used. You see how much you have sprayed, as well as where you have sprayed. This ensures you spray only the bad guys and keep the good. The dye also minimizes the chance of stepping in the chemical and tracking it through your yard. It is important to note that, after

spraying onto your weeds, the dye will disappear in just a few hours. • HOW TO USE: Mix with herbicides to temporarily mark sprayed areas. • MIX RATE: 1 oz. Blue Viper Disappearing Dye with 16 oz. of water/ chemical mixture.

PRECISION SPRAYING TIPS • Remember to regularly inspect the nozzle for accumulated debris. Flush with water to clear if needed. • To protect the pump system, a fine mesh screen is located inside the tank and needs to be free of debris. Inspect the screen filter regularly and remove to clean if debris is noticed. For maintenance see Troubleshooting Guide. • There is always going to be some trial and error when first learning to use your Blue Viper. After you have sprayed a small area, stop and check where the product was applied. • To get familiar with the misting spray pattern, we recommend filling the tank with water and practice spraying on a concrete surface. • If you are using a systemic product (such as glyphosate, the active ingredient in Roundup), you will not need to wet the surface completely. Using the Blue Viper dye, you will see a slight blue haze when you have applied enough chemical for most plants and grasses. COVERAGE • Because most people over-apply chemicals to the point of wetting the plant, the amount of chemical used is often reduced when used with the Blue Viper dye. If your mix rate is 1 ounce of 41% glyphosate, along with 1 ounce of dye in a tank of solution, you will find that you can walk quickly while spraying and get good coverage. Good coverage with this type of herbicide will appear as a light haze of blue on the surface being applied. • The Blue Viper is an exceptionally effective tool to apply Glyphosate because of the very fine droplet size that it delivers. • If you are using other chemicals, you may need to wet the surface of the plant more thoroughly. NOTE: Always read and follow all label directions.

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER

BLUE-VIPER LIMITED WARRANTY DURATION OF THIS WARRANTY:   Product is warranted for one year from date of purchase against manufacturer or workmanship defects . Blue Viper warrants to the original purchaser of this product at retail that it is free from problems in materials and workmanship for the period specified above from the original date of purchase. This warranty does not apply to damage to the product resulting from accident, misuse, neglect, alteration, modification, tampering, or failure to follow instructions supplied with the product. This warranty does not cover normal wear and tear. The warranty shall be void if the product is used commercially. If the product or any party of it should malfunction within the warranty period, telephone our CUSTOMER SERVICE DEPARTMENT at (888) 243-4891 . We will repair or replace any part found to be defective upon our examination, but will not pay shipping costs or any other expenses. You must retain your sales receipt as proof of the date of purchase and include it with any return of the product. This warranty is valid only in North America. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR CONSUMER USE, ARE LIMITED TO 1 YEAR.  BLUE VIPER COMPANY EXCLUDES LIABILITY UNDER THIS WARRANTY FOR ANY AND ALL INCIDENTAL AND CONSEQUENTIAL LOSS OR DAMAGES. Please do not return the sprayer to the retailer. If you have a problem or questions, contact our consumer help line: (888) 243-4891 info@blue-viper.com • www.blue-viper.com • 6323 N 150 E, Monon, IN 47959 Please do not ship your sprayer or parts to our office unless you are specifically requested to do so. Unsolicited returns to Blue Viper will not be accepted or acknowledged. Call (888) 243-4891 for assistance.

©2016 Blue Viper™ All rights reserved.

ADDITIONAL HELP & INFORMATION PHONE: (888) 243-4891 (Consumer care line open 9 am - 4 pm Monday - Friday) For Warranty service and questions about assembling or using your sprayer we suggest you check our online FAQ section first, but please feel free to call us if you are not certain or have any other questions. We welcome your call.

ONLINE: www.blue-viper.com Complete catalog of all company products and helpful spraying and gardening information.

WRITE: Blue Viper, 6323 North 150 East, Monon, IN 47959

VISIT WWW.BLUE-VIPER.COM FOR TIPS & TRICKS ON USING YOUR BLUE VIPER

DANGER This sprayer operates with liquid under pressure from the pump to the spray nozzle (The tank is not pressurized).  Failure to observe CAUTIONS and follow instructions for use and maintenance could result in INJURY or PROPERTY DAMAGE from discharge of spray material. DO NOT USE ANY FLAMMABLES IN THIS SPRAYER as it is not designed nor intended for such use. Some spray materials can ignite or explode. Do not spray in an enclosed space, near an open flame such as found in a BBQ grill or water heater, near an electric motor or open switch, or any source of heat. DO NOT SMOKE while spraying. Use of flammables could result in SERIOUS INJURY or PROPERTY DAMAGE from unintended ignition or explosion. DO NOT USE ANY CAUSTICS OR ACIDS IN THIS SPRAYER , since these can damage or weaken the sprayer and its parts, resulting in SERIOUS INJURY or PROPERTY DAMAGE from unintended discharge. • Follow chemical manufacturers instructions on disposal of all waste from the sprayer. • Weather conditions and terrain must be considered when using the Blue Viper. • Do not spray on windy days. DYE • Blue Viper disappearing dye is a patented, non-hazardous, non-staining colorant. • Keep Out Of The Reach Of Children . Avoid contact with eyes and skin. • May be harmful if swallowed. • Do not release concentrated color directly into the environment. • See MSDS for additional information. • Emergency Contact: ChemTrec (800) 424-9300. WARNING: Keep sprayer and all spray materials away from children and pets. CAUTION • Only use weed killers and insecticides approved for use in spraying systems. • Use Personal Protective Equipment as directed by the product. • Be sure to read and follow all chemical label directions. • BEFORE USING YOUR SPRAYER, thoroughly INSPECT the sprayer. Be sure there are no loose parts. • DO NOT USE if any parts appear to be damaged, discolored, brittle, loose. • Do not point sprayer toward your head or body. Never allow any of the spray to land on your skin. • Do not use hot or boiling liquids in sprayer since this may weaken or damage tank, pump or hose. • Do not leave residue or spray material in sprayer after use. It may harden and clog the sprayer or its parts. • Empty, clean and drain sprayer tank and pump at end of each season according to directions. • Do not smoke or eat while mixing spray materials or spraying, and wash up afterwards. • Do no attempt to replace any parts on your sprayer. Other parts may not fit properly or may be weakened by spray materials and fail, resulting in SERIOUS INJURY by unexpected discharge of spray material. • Do not submerse in water or allow staying wet. • Do not remove screws in handle control end or sprayer end. No user service parts. • Make sure you follow all instructions for mixing and safety precautions found on the weed killer/insecticide packaging or website. • Some chemicals might damage the pump valves if allowed to soak untreated for a long period of time. Always flush the pump with water after use.